4PSA DNS Manager 4.0.0
Virtuozzo/OpenVZ Integration

Manual Version 77835.5 at 2011/03/07 15:05:51

For suggestions regarding this manual contact: docs@4psa.com

All rights reserved.

Distribution of this work or derivative of this work is prohibited unless prior written permission is obtained from the copyright holder.

DNS Manager is a registered trademark of 4PSA (Rack-Soft, Inc.).

Plesk is a registered trademark of Parallels, Inc.

Linux is a registered trademark of Linus Torvalds.

RedHat is a registered trademark of Red Hat Software, Inc.

All other trademarks and copyrights are property of their respective owners.

Table of Contents

Who Should Read This Guide
How to Prepare a Virtuozzo/OpenVZ HW Node for 4PSA DNS Manager
Compatibility
Contact and Support
15 minutes
It will take about 15 minutes to an intermediate user to read this document and follow the steps highlighted here.

Who Should Read This Guide

This guideline is targeted at Virtuozzo/OpenVZ server administrators. The information below requires medium Linux knowledge. After reading this document, you will be able to prepare Virtuozzo Hardware Nodes for 4PSA DNS Manager installation. The preparation of a hardware node for 4PSA DNS Manager can take no more than 5-10 minutes. The advices below DOES NOT affect system integrity, stability or performance.

How to Prepare a Virtuozzo/OpenVZ HW Node for 4PSA DNS Manager

4PSA DNS Manager 4.0.0 can be installed on Virtuozzo/OpenVZ VPS. As long as you adjust the VPS configuration to match the system usage, the performance is not affected by virtualization. 4PSA DNS Manager is shipped in Virtuozzo standard and EZ templates, which simplify the software deployment.

In order to be able to install and use 4PSA DNS Manager on VPSes, you must prepare the Hardware Node. The operation is outlined below.

The templates can be installed like any other Virtuozzo templates, from command line or from VZCP. In order to install 4PSA DNS Manager in a VPS, you must install all template packages that start with:

dnsmanager*

at the same time.

The 4PSA DNS Manager Virtuozzo templates can be downloaded from:

http://dnsmanager.4psa.com/vzdns/

After installation you can start using 4PSA DNS Manager. Change your browser to:

https://<vps_ip>:8550

and login with:

Username: admin

Password: welcome

Please change the password after your first login. For further details please refer to 4PSA DNS Manager User's Guides, that can be downloaded from the corresponding page.

Compatibility

Hardware Node: 4PSA DNS Manager is compatible with Virtuozzo 2.62 and higher versions, running on all supported Operating Systems.

VPS Operating Systems: It is compatible with CentOS 4.x and CentOS 5.x on EZ templates. On standard templates, the following packages can be used:

  • ce4-p8 (i386)
  • ce4-p4 (x86_64)

Contact and Support

For online help and support please visit:

For mailing addresses and phone numbers from our offices:

http://www.4psa.com/contactus

If you have any question, do not hesitate to contact us.